5 Lessons Learned: Businesses

Can I Install My Own Roof?

You are most probably reading this article because your home or cabin needs a new roof. Can I still install a metal roof even if my house is old? If you were able to have sufficient knowledge about roof installation, then most probably, you can install your own metal roof.

Choosing the right material should be the first thing that you would do if you want to install metal roofs. These can include the hardware, decking, flashing that is appropriate for your existing roof’s pitch, framing, and metal roof panels. In order for you to easily purchase the right hardware, it is advisable to bring with you a detailed drawing thus, you will already know how many roofing panels should you have.

If your metal roofing installation is being done over the existing roofing materials you may need to install furring strips or asphalt paper between the two roofs. Of course, to make sure that you are doing the job correctly and quickly, you should see to it that you have assembled the correct tools beforehand. Reading and following the manufacturer’s instructions plays a vital role before you do the actual job.
Smart Tips For Finding Roofing

Knowing the pitch of your existing roof decking will give you a knowledge whether your roof has a good drainage or not. You really have to check your existing roof decking since every metal roof has different variations and designs, hence, their roof pitch requirements are also different from each other. Your roof needs to have a pitch first before you can select a design for a particular pitch. If the pitch of the roof is low, you may have to have additional sealant and hardware to make sure that you have a roof that is watertight. You can either use an internal or external fastener for your metal roofing installation, however, exterior fastener is more recommended. The type of flashing, trims, and fasteners that will be used depends on the roofing panels you choose.
Figuring Out Roofs

There are different tools that you will be needing for metal roofing installation, they are the following; Eye protection, fastening tools, gloves with a good grip, for smaller roofing jobs you may just need a cordless drill that has a fastener attachment but if it is a large roofing job you should have a dedicated impact driver, to cut across the panel ribs you may just need a nibbler attachment for your cordless drill or power saw that is fitted with a carbide blade for metal cutting and for cutting around obstructions you will need small hand-held metal snips that will make both left-or-right hand cuts.

Leave a Reply